TRAPChecker is an ultrasound solution designed to
access the condition of steam traps and valves.
Focused
Inefficient steam systems waste energy and impact product quality. TRAPChecker is an ultrasound solution focused on finding failed steam traps. It works on every style of trap and failure mode.
Simple
TRAPChecker is so easy to use. Simply open the box, connect the sensor, and hear the difference between a good and bad steam trap. Its vibrant color display offers repeatable, accurate, digital measurements.
Affordable
As much as 40% of your steam traps could be operating in a failed state. The low entry cost of TRAPChecker and the high cost of energy could see your investment recovered the first time you use it.
General
| Function |
Ultrasound measurement device
|
| Display |
160×128 pixels Color OLED
|
| Operable with | RS1 Needle Sensor |
| Measurement channel |
1 channel via a 7 pole LEMO connector
|
| Keyboard | 5 function keys |
| Measuring range |
-6 to 99.9 dBµV (reference 0 dB = 1 µV)
|
| Resolution | 0.1 dBµV |
| Measurement bandwidth | 35 to 42 kHz |
| Signal amplification | +30 to +102 by step of 6 dB |
Environmental
| Operating temperature range | -10 to +50 °C |14 to 122°F |
| IP rating | IP42 |
Mechanical
| Housing material |
ABS
|
| Dimensions housing |
158x59x 38.5 mm | 6.22″ x 2.32″x 1.51″
|
| Electrical connector | 7-pole female LEMO |
| Weight | 164g | 5.78oz |
Power
| Battery | 2 AA batteries |
| Autonomy | 7 hours |
Audio
| Amplification | 5 adjustable positions in steps of 6 dB |
| Operable with | SDT provided headset only |
| Maximum output | +83dB SPL with SDT headset |
| Headset | 25dB NRR Peltor HQ headset |